Friday, December 27, 2013

"Stamp" Concrete with Impression Patterns by NewLook



Learn more at www.ImpressionPatterns.com

An Impression Pattern is a durable, long-lasting polyurethane pattern. It's not a stamp. It's not a stencil. It's an Impression—the new method for imprinting texture and design into fresh concrete and overlays.

Impression Patterns are easier to use than their stamp and stencil counterparts and they're very versatile. They cost less and are much more forgiving.

They are available in many popular field and border stock patterns, including ashlar, brick, cobble stone, and random stone. You can even customize your Impression to achieve any intricate design you want.

Preparation

Prepare the Impression once the concrete is poured properly and finished with a steel trowel or bull float. Thoroughly coat both sides of the Impression with liquid release. Spray a liberal amount of release onto the concrete, as well. This prevents the Impression from sticking and helps it leave a well-defined pattern.

Placing the Impression

Place the Impression wherever you want. Don't worry about laying it down perfectly. The process is very forgiving. The marks and lines left from the Impression will disappear when the Impression is troweled. Adjust and move the Impression as needed until you are satisfied with its position.

Troweling & Finishing

One of the unique benefits of using Impressions is found in the finishing process. Begin by gently tapping and troweling over the Impression. This helps push the Impression into the top layer of fresh concrete so that the top part of the Impression becomes flush with the concrete surface. Use standard troweling techniques to achieve the desired finish.

Once the Impression is set, you can add texture using a textured roller. Be sure to coat the roller with release agent. Using powder release can also help prevent puckering and sticking.

Remove the Impression

Once the concrete is dry, remove the impression by lifting up from one end.

No comments:

Post a Comment